Drywall Screw

HOME > Product > Drywall Screw

Quantity:

Drywall Screw, Fine Thread - Type 17

Phillips Bugle Head-Fine Thread

Size Drive Size Application
# 6 x 3/4" # 2 Phillips Original and primary application of D/W to 20-25gauge metal studs. Also known as "all-purpose" or "many purpose" screws.
# 6 x 1" # 2 Phillips
# 6 x 1-1/8" # 2 Phillips
# 6 x 1-1/4" # 2 Phillips
# 6 x 1-5/8" # 2 Phillips
# 6 x 2" # 2 Phillips
# 6 x 2-1/4" # 2 Phillips
# 8 x 2-1/2" # 2 Phillips
# 8 x 3" # 2 Phillips
# 10 x 3-1/2" # 2 Phillips Extra-Length allows user to attach D/W to 20-25 gauge metal stud-used in "scab over" applications.
# 10 x 3-3/4" # 2 Phillips
# 10 x 4" # 2 Phillips
# 10 x 4-1/2" # 2 Phillips
# 10 x 5" # 2 Phillips
# 10 x 6" # 2 Phillips

Phillips Bugle Head-Coarse Thread

Size Drive Size Application
# 6  x 1" # 2 Phillips Original and primary application of D/W to wood studs. Also used in many interior wood and fixture fastening applications.
# 6 x 1-1/8" # 2 Phillips
# 6 x 1-1/4" # 2 Phillips
# 6 x 1-1/2" # 2 Phillips
# 6 x 1-5/8" # 2 Phillips
# 6 x 1-3/4" # 2 Phillips
# 6 x 2" # 2 Phillips
# 6  x 2-1/4" # 2 Phillips
# 8  x 2-1/2" # 2 Phillips
# 8  x 3" # 2 Phillips
# 10 x 3-1/2" # 2 Phillips
# 10 x 3-3/4" # 2 Phillips
# 10 x 4" # 2 Phillips
# 10 x 4-1/2" # 2 Phillips
# 10 x 5" # 2 Phillips
# 10 x 6" # 2 Phillips

Drywall / Accessory Screws

Size Drive Size Application
# 6 x 1" # 2 Phillips D/W tometal studs-20-27 gauge.Especially effective in "standard duty" studs to prevent screw stripping. Also an excellent fastener for use in wood & plastic applications.
# 6 x 1-1/8" # 2 Phillips
# 6 x 1-1/4" # 2 Phillips
# 6 x 1-5/8" # 2 Phillips
# 6 x 2" # 2 Phillips
# 6 x 2-1/4" # 2 Phillips
# 8 x 2-1/2" # 2 Phillips
# 8 x 3" # 2 Phillips

Phillips Bugle Head-Laminator

Size Drive Size Application
# 10 x 1-1/2" # 2 Phillips Temporary fastening of D/W to D/W in double wall requirements.

Phillips Pan Head-Framer

Size Drive Size Application
# 7 x 7/16" # 2 Phillips Light gauge metal stud & track framing

Phillips Trim Head - "S" Point

Size Drive Size Application
# 6 x 1-5/8" # 1 Phillips Finish screw for fastening of base or trim through D/W to light gauge metal studs.
# 6 x 2-1/4" # 1 Phillips
# 8 x 3" # 2 Phillips

Accessory Screws

Square Drive Trim Head - "S" Point

Size Drive Size Application
# 6 x 1" # 1 Sq. Robertson Finish screw for fastening of base or trim through D/W to light gauge metal studs.
# 6 x 1-5/8" # 1 Sq. Robertson
# 6 x 2-1/4" # 1 Sq. Robertson
# 8 x 3" # 2 Sq. Robertson

Modified Truss Head-Black Phosphate Or Zinc Plated

Size Drive Size Application
# 8 x 9/16" # 2 Phillips For the application of metal lath to light 20-25 gauge metal studs. Recommended drive speed is 2500 rpm.
# 8 x 3/4" # 2 Phillips
# 8 x 1" # 2 Phillips
# 8 x 1-1/4" # 2 Phillips
# 8 x 1-5/8" # 2 Phillips
# 8 x 1-7/8" # 2 Phillips

Cabinet Screw - Black Phosphate

Size Drive Size Application
# 8 x 2-3/8" # 2 Phillips For Cabinet Installation
# 8 x 3 # 2 Phillips

Self Piercing Screws

Hex Washer Head Slotted-Zinc Plated

Size Drive Size Application
# 7 x 1/2" 1/4" Hex For H.V.A.C. or other thin gauge metal fastener. Screws have a needle point forself piercing of sheet metal in a range of .0209 to .0359.
   
# 8 x 1/2" 1/4" Hex
# 8 x 3/4" 1/4" Hex
# 8 x 1" 1/4" Hex
# 8 x 1-1/2" 1/4" Hex
# 8 x 2" 1/4" Hex
   
# 10 x 1/2" 5/16" Hex
# 10 x 3/4" 5/16" Hex
# 10 x 1" 5/16" Hex
# 10 x 1-1/2" 5/16" Hex
# 10 x 2" 5/16" Hex

Type 17
Bugle Head: This design provides easy countersinking in a variety of different materials and be driven flush with the materials.

Pan Framing
Trim Head: allows easy countersinking. Nibs under the head help countersink the head without splitting.
Modi-Truss (Round Washer Head): This provides maximum bearing surface with minimum head height.